Cat Box

The CAT Box Stage Box allows four lines of
balanced analog audio to be run down a
shielded CAT5/6/7 cable. Each of its four
channels can carry balanced analog,
AES/EBU, DMX, and Clear-Com signals
hundreds of feet away. The CAT Box is a
fully passive unit which can be input directly
into analog or digital consoles. Each channel
is isolated which means channel 1 can send
a DMX Signal while channel 2 is sending
balanced analog all down the same shielded
CAT5 cable. Multiple CAT Box stage boxes
can be daisy chained to allow the same four
analog channels to be dropped in multiple
locations. Each CAT Box stage box has an
Ethercon input and Ethercon parallel output
that allows the CAT Box to be used as a
hard-wire split.
Available in four male XLR and four female
XLR versions

Cat Rack

The CAT Rack consists of twelve neutrik xlr
connectors and 6 neutrik etherCONs. The
twelve channels are broken down into three
sets of four channels marked A, B, and C
which are transported down a shielded CAT5
cables. Each line can carry balanced analog,
AES/EBU, DMX, and Clear-Com signals
hundreds of feet away. The CAT Rack is fully
passive unit which can be input directly into
analog or digital consoles. Multiple CAT
Racks can be daisy chained to allow the
same channels to be dropped in multiple
locations. Available in custom four channel
all male or all female orientations

Cat Tails

CAT Tails utilizes a CAT5/etherCON
breakout to four XLR cables. Each of its four
lines can carry balanced analog, AES3,
DMX, and COM signals hundreds of feet
away. The CAT Tail is a fully passive unit
which can be input directly into analog or
digital consoles. Each channel is isolated
which means channel 1 can send a DMX
Signal while channel 2 is sending balanced
analog all down the same shielded CAT5
cable.
Eliminates the need for additional XLR
cables just plug directly into your audio
channels and run them over shielded CAT5.
Available in Male and Female

Wall Cat

The SoundTools WallCAT is designed to
transport audio easily and conveniently from
one room to the next utilizing shielded
CAT5/6/7 cable. Each WallCAT has an input
and parallel RJ45. That enables audio to be
sent from one room to multiple locations or
from multiple locations to a single room.
Each channel is isolated which means
channel 1 can send a DMX Signal while
channel 2 is sending balanced analog all
down the same shielded CAT5 cable. The
double gang plate is designed to fit standard
electrical junction boxes while the connectors
and PCB system require only a 1.2” depth.
Available in black and silver.

XLR Sniffer/Sender

Designed by Rat Sound to deal with the “real
world” of pro audio, the SoundTools XLR
Sniffer/Sender is the perfect tool for live
environments. Test snake lines and cables
when the ends are at a distance and avoid
running extra cables just to test. Utilizing
phantom power the Sniffer end can quickly
test snake lines in minutes. The aluminium
barrels eliminates the problem many testers
face with solder joints failures and the unit
will never rust. 3 simple LED’s will instantly
diagnosis your cable as it tests for every
possible shot, open, or cross wire in XLR
cables. If the LED’s read all green you cable
will work!

DMX Sniffer/Sender

Designed by Rat Sound to deal with the “real
world” of pro audio, the SoundTools DMX
Sniffer/Sender is the perfect tool for live
environments. Test snake lines and cables
when the ends are at a distance and avoid
running extra cables just to test. Utilizing
phantom power the Sniffer end can quickly
test snake lines in minutes. The aluminium
barrels eliminates the problem many testers
face with solder joints failures and the unit
will never rust. 3 simple LED’s will instantly
diagnosis your cable as it tests for every
possible shot, open, or cross wire in DMX
cables. If the LED’s read all green you cable
will work!

¼ TRS Sniffer/Sender

Designed by Rat Sound to deal with the “real
world” of pro audio, the SoundTools TRS
Sniffer/Sender is the perfect tool for live
environments. Test snake lines and cables
when the ends are at a distance and avoid
running extra cables just to test. Utilizing
phantom power the Sniffer end can quickly
test snake lines in minutes. The aluminium
barrels eliminates the problem many testers
face with solder joints failures and the unit
will never rust. 3 simple LED’s will instantly

NL4 Sniffer/Sender

Designed by Rat Sound to deal with the “real
world” of pro audio, the SoundTools NL-4
Sniffer/Sender is the perfect tool for live
environments. Test snake lines and cables
when the ends are at a distance and avoid
running extra cables just to test. The
aluminium barrels eliminates the problem
many testers face with solder joints failures
and the unit will never rust. 3 simple LED’s
will instantly diagnosis your cable as it tests
for every possible shot, open, or cross wire in
NL-4 cables. If the LED’s read all green you
cable will work!

Mic Swapper

The Mic Swapper offer two inputs (A and B)
and two outputs (1 and 2) and a switch that
allows the outputs to be reversed. If the main
vocal goes down turn the rotary switch and
the spare vocal will show up in the main
vocal channels.

Mic Switcher

The Mic Switcher enables the user to choose
between three microphones without using a
spare board channel. It’s comprised of four
XLR cables terminated to rugged rotary
switch and aluminium barrel.

SuperCat Shielded EtherCON

Our SuperCAT provides an economic option
for cabling in the toughest audio, video, and
lighting environments. The SuperCAT is a
four twisted pair 26 AWG cable, surrounded
by a braided shield and a halogen free and
flame retarded PUR (Polyurethane) that
provides added protection and flexibility.
Comes in 100m/330ft Cable Drum –
30m/100ft – 15m/50ft – 7.6m/25ft lengths

SuperCat Shielded EtherCON on
Cable Drums

Our SuperCAT provides an economic option
for cabling in the toughest audio, video, and
lighting environments. The SuperCAT is a
four twisted pair 26 AWG cable, surrounded
by a braided shield and a halogen free and
flame retarded PUR (Polyurethane) that
provides added protection and flexibility.
Comes in 100m/330ft Cable Drum –
30m/100ft – 15m/50ft – 7.6m/25ft lengths

SuperCat Sound
Entertainment Grade

The SuperCAT Sound is a premium shielded
(U/FTP) CAT5e cable. Its specifications
exceed standard CAT5e, 6, and 7.
Comprised of 12 conductor cable with four
twisted pairs each having an individual drain
wire. This unique design allows SuperCAT
Sound to be terminated directly to tails (4
XLR, 4 DMX, 4 ¼”TRS, 4 Mini Plug, etc) or
standard RJ45/etherCON ends. Surrounded
by a rugged polyurethane jacket that will
withstand extreme temperatures while
remaining flexible.
Comes in 100m/330ft – 60m/200ft –
30m/100ft – 15m/50ft – 3m/10ft – 1m/3ft
lengths.

SuperCat Sound
Entertainment Grade on Cable
Drums

The SuperCAT Sound is a premium shielded
(U/FTP) CAT5e cable. Its specifications
exceed standard CAT5e, 6, and 7.
Comprised of 12 conductor cable with four
twisted pairs each having an individual drain
wire. This unique design allows SuperCAT
Sound to be terminated directly to tails (4
XLR, 4 DMX, 4 ¼”TRS, 4 Mini Plug, etc) or
standard RJ45/etherCON ends. Surrounded
by a rugged polyurethane jacket that will
withstand extreme temperatures while
remaining flexible.
Comes in 100m/330ft – 60m/200ft –
30m/100ft – 15m/50ft – 3m/10ft – 1m/3ft
lengths.